Skip to main content


The L-507uXII integrated amplifier earns its Mark II status by combining the knowledge and experience of developing refined pure Class A integrated amplifiers with state of the art technology. The L-507uXII features the New LECUA 1000 attenuator and a discretely configured buffer circuit as well as the Version 4.0 ODNF (Only Distortion Negative Feedback) original feedback circuit from LUXMAN to achieve spatial expression, overwhelming power and clarity that is comparable to a separate amplifier. Technology has progressed but the philosophy remains the same.The L-507uXII represents a quantum leap in integrated amplifier design and reflects the global perception of LUXMAN as the leader in brilliant audio expression and reproduction.

  • Rated output
    110W + 110W (8Ω),
    210W + 210W (4Ω)
  • Input sensitivity/input impedance
    PHONO (MM): 2.5mV/47kΩ
    PHONO (MC): 0.3mV/100Ω
    LINE: 180mV/47kΩ
    BAL.LINE: 180mV/55kΩ
    MAIN-IN: 1.05V/47kΩ
  • Output voltage
    REC OUT: 180mV, PRE-OUT: 1V
  • Frequency response
    PHONO: 20Hz to 20kHz (±0.5dB)
    LINE: 20Hz to 100kHz (within -3dB)
  • Total harmonic distortion
    0.007% or less (8Ω, 1kHz)
    0.08% or less (8Ω, 20Hz to 20kHz)
  • S/N ratio (IHF-A)
    PHONO (MM): 91dB or more
    PHONO (MC): 75dB or more
    LINE: 105dB or more
  • Volume adjustment
    New LECUA1000
  • Amplification circuit
    ODNF 4.0
  • Output configuration
    Bipolar 3-parallel push-pull
  • Damping factor
  • Max. amount of tone control
    BASS: ±8dB at 100Hz
    TREBLE: ±8dB at 10kHz
  • Power supply
    230V~(50Hz) / 115V~(60Hz)
  • Power consumption
    86W (under no signal), 0.4W (at standby)
  • External dimensions
    440(W) x 178(H) x 454(D) mm
    front side knob of 20mm and rear side terminal
    of 27mm included in depth
  • Net weight
    25.0kg (main unit)
  • Accessories
    Remote control (RA-17A)
    Power cable

    Power cable
  • Speaker terminal Supported Y-lug terminal dimension
    Width of part a: 15mm or less
    Width of part b: 8mm or more
    * Connection may not be performed
    depending on the shape of the
    Y-lug terminal.



Datum Aangepast


1 July 2019